Corona Net/Tools, Adhesives & Materials products

Saw 27mm with handle 12,99 €

Thu, 15 Oct 2026 17:14:35 +0200

metal rip saw
Useful cutting blade of 115x18 mm.
Ideal for prependicular cut or oblique cut of. strips, rods or boards.

Cutting Mat 14,99 €

Thu, 15 Oct 2026 17:13:50 +0200

Use as a surface for cutting out different parts.

AWL 3,90 €

Sat, 24 Oct 2026 00:54:36 +0200

AWL

Mini Caliper 2,99 €

Fri, 16 Oct 2026 00:54:51 +0200

Mini Caliper

Precision Tweezers 3,99 €

Fri, 16 Oct 2026 00:54:51 +0200

Precision Tweezers

Flat-nose Pilers 5,99 €

Fri, 25 Sep 2026 15:39:22 +0200

Flat-nose Pilers

Round nose Pilers 6,99 €

Thu, 15 Oct 2026 09:36:09 +0200

Round nose Pilers

Precision cutting pilers 6,99 €

Fri, 16 Oct 2026 00:54:52 +0200

Precision cutting pilers

White glue 100 ml 3,99 €

Sat, 24 Oct 2026 00:39:22 +0200

White vinyl glue

Polyvinyl acetate-based adhesive.
Warning! It may make floors slippery.
Do not swallow.
Warning! Not suitable for children under 14.
Use under adult supervision.
Warning! EUH 208. Contains C(M)IT/MIT (3:1).
May cause an allergic reaction.
After eye contact: wash with plenty of clean water for 10 minutes and seek medical assistance.
Skin contact: Remove contaminated clothing. Wash with
soap and water.
If swallowed rinse the mouth with plenty of water and drink lots of water. See a doctor and take this label.
Always wash your hands after using the adhesive.
Close the container after use.

Instafix (Cyanoacrylate) 5,99 €

Fri, 16 Oct 2026 00:55:36 +0200

quick drying glue Cyanoacrylate

The InstaFix© by OcCre is a quick drying glue Cyanoacrylate

This type of glue is versatile and can be used to bond various materials such as wood, metal, plastics, fabrics, cardboard, and many more.

In modeling, it is used to bond small metal pieces and structural components that, due to their shape or location, do not stay in place and require instant fixation.

20ml

CYANOACRYLATE LABELING RECOMMENDATIONS OCCRE
Applications:
Adhesive developed for joining materials such as wood, rubber, metals, leather, skin, porcelain,
plastics, rubber, etc. with each other or combined. Special for joining materials with porous surfaces.
Does not bond polyethylene, polypropylene, Teflon and silicone.
Curing properties:
Curing time: 5-20 sec. Curing rate depends on the substrate used, on the gap, on the temperature and
on the environmental humidity. Total fixation in 24 hours. Fill capacity: 0.07 mm.
Directions for use
Clean and degrease all surfaces. Apply a small amount of adhesive (excess adhesive can produce less
resistant joints), on one of the surfaces.
for a few seconds to fix the components and clamp them until they are completely fixed. Wait 24 hours
until full cure before any mechanical stress.
Warnings
Causes skin irritation. May cause respiratory irritation. Causes serious eye irritation. Avoid breathing
vapours. Do not get in eyes, on skin, or on clothing. IF INHALED: Remove person to fresh air and keep
comfortable for breathing. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact
lenses, if present and easy to do. Continue rinsing. Dispose of contents/container at a licensed waste
disposal facility. Cyanoacrylate. Danger. Bonds skin and eyes in seconds. Keep out of the reach of
children.

Leisten Biegesystem 39,95 €

Thu, 15 Oct 2026 17:14:54 +0200

The most common task in historical model building is bending wood. Almost every piece of wood used has to be shaped. The basic tool consists of a 20/30-watt soldering iron onto which either the shaping and bending tip for thinner wood or the plank bender for thicker strips can be fitted as required.

The system is self-regulating. Once the working temperature has been set it is maintained, meaning that the system is designed for continuous operation (the temperature is regulated by pushing the attachments farther on or pulling them back).

The wood to be bent is soaked only briefly in cold water, depending on the type of wood for between 1 and 15 minutes, then removed and allowed to rest for a few more minutes. The wood should be thoroughly damp but under no circumstances soaking wet. Slide the wet plank into the eye of the plank bender, wait a moment for the water that has penetrated the wood cells to warm up, then press on the other end of the plank and the strip will begin to bend.
Even bending wood along its narrow edge, for example for handrails, is possible with the attachments. Experience has shown that the thickness of the strip to be bent should be at least one third of its width. The best advice for a model builder, however, is to experiment: take pieces from your scrap box, soak as many different types of wood as possible and find out what can be done. Leave some scraps in water overnight and the next day you will discover which types of wood tolerate longer soaking times.

Kittifix Holzleim Express -2500g 19,03 €

Thu, 15 Oct 2026 17:40:49 +0200

The Nature Guy
An adhesive for hobby and professional carpenters that bonds all types of untreated natural surfaces.
Suitable for all common woods, wood-based materials, and laminated boards.

Application

Apply thinly on both sides
Position parts and press for 5–10 minutes
Sets quickly
Kittifix Wood Glue Express has been one of the most trusted wood adhesives for decades, used for bonding and laminating almost all types of wood.
This glue is also suitable for bonding plywood, OSB hardboard, and rigid laminated boards in doors and furniture.

Fields of application
Bonding plywood, OSB hardboard, and rigid laminated boards in doors and furniture
Well-suited for surface bonding and laminating
Apply the wood glue as thinly as possible on both sides. Assemble and fix the parts to be bonded within 4–5 minutes. Then maintain pressing for approx. 8–10 minutes.

The adhesive corresponds to strength class D2.

with drain cock

Technical information

The wood moisture should be below 18% before bonding.

Strongly resinous and/or oily woods, such as teak or bangkirai, should be cleaned (degreased) with e.g. acetone at the intended bonding points before gluing.
Do not apply at temperatures below +10 °C.

Contains a mixture of 5-chloro-2-methyl-2H-isothiazol-3-one and 2-methyl-2H-isothiazol-3-one, 1,2-benzisothiazol-3(2H)-one. May cause allergic reactions.

Vitrine 30,69 €

Fri, 25 Sep 2026 15:39:26 +0200

Dimensions mm 332x233x282 Delivery without Glass

Model building item, not a toy!

Not suitable for children under 14 years!

Vitrine 42,78 €

Thu, 15 Oct 2026 05:47:03 +0200

Dimensions: 830 x 332 x 282 mm
The display case is supplied without glass panels.

Model building item, not a toy!

Not suitable for children under 14 years!

Kittifix Heat-Resistant Spray Adhesive 110°C 15,62 €

Thu, 15 Oct 2026 17:40:56 +0200

The Sun Worshipper
Heat-resistant, film-forming adhesive suitable for light and heavy materials with smooth or rough surfaces.
Spray Adhesive
Extra strong
Heat-resistant up to +110°C
Quality adhesive

Kittifix Extra Strong Heat-Resistant Spray Adhesive +110°C features exceptionally strong bonding performance and ensures permanent connections. With its film-forming adhesive, it is suitable for light and heavy materials with smooth or rough surfaces such as fabric, plastics, cardboard, foam rubber, insulation materials, vinyl, leather, artificial leather, and rubber – and it also adheres to metal and wood.

The powerful spray adhesive is resistant to moisture and high temperatures up to 90°C (short-term up to 110°C). Its variable spray nozzle ensures convenient handling and allows easy regulation of the spray amount. Thanks to its versatile applications, it serves as a multipurpose helper in the household, hobbies, and trade.

Areas of Application
For strong and permanent bonds.
Bonding of heavy materials.
Bonding of fabric, plastics, cardboard, paperboard, foam rubber, insulation materials, vinyl, leather, artificial leather, rubber.
Also adheres to metal and wood.
Suitable for uneven surfaces.
Ideal for upholstery and saddlery.
Versatile helper in household, hobbies, and trade.

Instructions for Use:
Shake the can before use and spray one side only onto a clean, dry surface from a distance of approx. 15 to 30 cm. For porous surfaces, apply to both sides.
Depending on surface properties and temperature, allow the applied adhesive layer to evaporate (approx. 10 minutes) until no threads form when tapping with your finger.
After airing time, position the parts and press firmly together.
After use, turn the can upside down and spray for approx. 2 seconds to prevent clogging.

Danger
Extremely flammable aerosol. Pressurized container: may burst if heated. Causes skin irritation. Causes serious eye irritation. May cause drowsiness or dizziness. Harmful to aquatic life with long-lasting effects. Keep out of reach of children. Keep away from heat, hot surfaces, sparks, open flames, and other ignition sources. No smoking. Do not spray on an open flame or other ignition sources. Do not pierce or burn, even after use.
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do. Continue rinsing. Keep container tightly closed. Protect from sunlight. Do not expose to temperatures exceeding 50°C / 122°F. Dispose of contents/container in accordance with local/regional/national/international regulations.

This product must not be used in areas with insufficient ventilation. This product must not be used for laying carpets.
Contains: Naphtha (petroleum), hydrotreated light, methyl acetate, cyclohexane, ethyl acetate.

UFI: 2NFN-JMU8-Q003-WOW1

Kittifix Plastik Modellbauklebstoff - 26g Flasche 4,40 €

Thu, 15 Oct 2026 17:40:55 +0200

The Constructive
with ultra-fine needle applicator

The Kittifix Plastic Adhesive Special is perfect for demanding model-building and creative hobby projects. The fine needle applicator enables precise bonding of tiny details and clear parts
.
Components are firmly and permanently joined (welded). Parts bonded with Kittifix Plastic Adhesive Special can be adjusted until the adhesive joint has cured. The curing time depends on the type of special adhesive used.

The plastic model adhesive “Extra Liquid” is also excellent for bonding clear windows in model building.
Developed for model makers and creative hobbyists who expect maximum reliability and professional results.

The plastic model adhesive is available in 3 versions:
– Standard (Magenta cap): normal curing time
– Express (Yellow cap): significantly shortened curing time
– Extra Liquid (Green cap): for bonding in narrow areas and attaching clear windows

Areas of Application
– Plastic model building – especially ideal for bonding small and delicate parts
– Bonding of clear parts

Not suitable for:
– Bonding elastic and flexible materials such as silicone and rubber
– Strongly oily or greasy surfaces
– Permanent extreme temperature conditions

Service / Notes
Plastic adhesive is a glue especially designed for polystyrene.

The fine nozzles included with Kittifix Plastic Model Adhesive “Extra Liquid” must be shortened by the user at the tip before use!

Technical Information
– Kittifix Plastic Adhesive Special should be used at room temperature
– Surfaces to be bonded must be clean and grease-free
– Apply adhesive precisely to the bonding surface
– Press the parts firmly together and hold briefly
– Can be corrected for a short time
– Store in a cool and dry place

Contains: 2-butanone, n-butyl acetate. May cause drowsiness or dizziness. Do not breathe mist/vapor/aerosol. Wear protective gloves/eye protection/face protection. Dispose of contents/container in accordance with local/regional/national/international regulations.

UFI: PDFN-1MS2-S00M-Y04U

10 Precision Blades PB1 Short 7,95 €

Fri, 16 Oct 2026 00:55:57 +0200

10 Precision Blades "PB1 Short" for Mozart Precision Knives P1 and P2

In Safety Dispenser on Blister Card. 100% Made in Solingen, Germany.

For Precision Cutting
Especially Durable
For Cutting Leather, Model Making and Creative Work, as Well as Deburring Plastic Parts
Various Versions Available
Made in Solingen, Germany

Kittifix 0.0% Solvent-Free Universal Adhesive 2500 15,91 €

Thu, 15 Oct 2026 17:40:51 +0200

Free from chemicals
Free from complexity
Free from solvents
Free from environmental concerns
Sustainable
Biodegradable
Washable
Refillable

The 0.0% Universal Adhesive is a fast-setting glue without solvents.
It is suitable as an adhesive for all creative projects. Because it is solvent-free, it can be used on almost all materials, provided that at least one of the parts to be bonded is porous or absorbent.

Kittifix 0.0% Universal Adhesive dries transparent.

Applications
Bonding leather, cardboard, paper, wood, felt, cork, and fabric to various materials and to each other

Bonding certain plastics and, in model building, bonding frames, spars, and stringers in aircraft and ship models

Bonding decorative fabrics to fiberboards, chipboards, and plywood

100 g bottle

Technical information:
During open time, the adhesive is washable with water!
Kittifix 0.0% Universal Adhesive does not drip!

Contains 2-Methyl-2H-isothiazol-3-one. May cause allergic reactions.

Kittifix Allzweckkleber - 75 g 4,40 €

Thu, 15 Oct 2026 17:40:51 +0200

The All-Rounder
Whether leather or paper, wood or cork – the yellow one can bind them all!
Quality Adhesive
Quick and clean adhesion for wood, paper, felt, cork, leather, textiles, and much more. Hardly any stringing.

Application
Apply a thin coat to clean bonding surfaces
Allow to air briefly and then press together
Full strength after complete drying
Not suitable for Styrofoam

Kittifix All-Purpose Adhesive is a resin-based glue.
It is easy to use and therefore particularly suitable for numerous bonding tasks in the household, office, workshop, as well as for hobbies.
Thanks to the fine applicator nozzle on the 75 g bottle, precise and clean application is possible.

Areas of Application
Bonding leather, cardboard, paper, wood, felt, cork, and fabrics
Bonding certain plastics in aviation, ship, car, and model railway hobbies
Bonding ribs, spars, and struts in aircraft and ship model construction
Bonding decorative fabrics to fibreboard and chipboard for decorations
Limited use also possible for: bonding metals, ceramics, and wood

Service / Notes
75 g empty bottle comes with a dosing tip (fine nozzle).
900 g bottle comes with a dispenser cap.

Technical Information
Not suitable for Styrofoam / Styrodur
Not washable

Danger:
Contains: Acetone, Ethyl acetate, Diethyl ether.
May cause drowsiness
Keep out of reach of children
Do not inhale mist/vapour/aerosol
Wear protective gloves/eye protection/face protection
Dispose of contents/container in accordance with local/regional/national/international regulations
Repeated contact may cause brittle or cracked skin
UFI: 62FN-1MOG-J00M-9MTK

Kittifix Kartonmodell - Bastelkleber - 80g 5,83 €

Fri, 16 Oct 2026 11:09:31 +0200

The Bastelino
Crafting fun knows no limits with this universally applicable glue for paper, cardboard, and more.

Quality Adhesive
Adheres to: wood, paper, felt, leather, textiles, Styrofoam, cardboard, model kits, and much more.

Application
Apply a thin layer to clean bonding surfaces
Allow to air briefly and then press together under light pressure
Full strength after complete drying

The cardboard model and craft glue is an almost universally usable adhesive for paper, cardboard, model kits, Styrofoam, textiles, and felt. It also bonds wood. For best results, apply thinly to the bonding surfaces, allow to air briefly, and then press together under slight pressure. Full bonding strength is achieved only after complete drying.

Areas of Application
Bonding paper, cardboard, model kits, Styrofoam, Styrodur, textiles, fibre fabrics, felt
Also suitable for bonding resin-free wood in model building

Perfect for creative work in nurseries, kindergartens, and schools!

Service / Notes
The cardboard model craft glue is free of plasticizers, permanently elastic, and resistant to aging.
80 g bottle comes with a dosing tip (fine nozzle).
900 g bottle comes with a dispenser cap.

Technical Information
Apply a thin layer to both surfaces and allow to air briefly.
Then press together under pressure.
Full bonding strength is achieved after complete drying.

Contains: Mixture of 5-Chloro-2-methyl-2H-isothiazol-3-one and 2-Methyl-2H-isothiazol-3-one, 1,2-Benzisothiazol-3(2H)-one.
May cause allergic reactions.