Corona Net/Tools, Adhesives & Materials/Specialist Tools products

Cutting Mat 14,99 €

Thu, 15 Oct 2026 17:13:50 +0200

Use as a surface for cutting out different parts.

AWL 3,90 €

Sat, 24 Oct 2026 00:54:36 +0200

AWL

Mini Caliper 2,99 €

Fri, 30 Oct 2026 11:08:38 +0100

Mini Caliper

Leisten Biegesystem 39,95 €

Thu, 15 Oct 2026 17:14:54 +0200

The most common task in historical model building is bending wood. Almost every piece of wood used has to be shaped. The basic tool consists of a 20/30-watt soldering iron onto which either the shaping and bending tip for thinner wood or the plank bender for thicker strips can be fitted as required.

The system is self-regulating. Once the working temperature has been set it is maintained, meaning that the system is designed for continuous operation (the temperature is regulated by pushing the attachments farther on or pulling them back).

The wood to be bent is soaked only briefly in cold water, depending on the type of wood for between 1 and 15 minutes, then removed and allowed to rest for a few more minutes. The wood should be thoroughly damp but under no circumstances soaking wet. Slide the wet plank into the eye of the plank bender, wait a moment for the water that has penetrated the wood cells to warm up, then press on the other end of the plank and the strip will begin to bend.
Even bending wood along its narrow edge, for example for handrails, is possible with the attachments. Experience has shown that the thickness of the strip to be bent should be at least one third of its width. The best advice for a model builder, however, is to experiment: take pieces from your scrap box, soak as many different types of wood as possible and find out what can be done. Leave some scraps in water overnight and the next day you will discover which types of wood tolerate longer soaking times.

Tools Pack 42,99 €

Fri, 16 Oct 2026 00:39:38 +0200

The packs includes:

Tool case with: sanding block with fine grit sandpaper, hammer, box cutter with precision blade, 0.75 hand drill, precision pliers, flat file, cutting pliers.
Pin Pusher
White glue 100 ml
Mini clamp (6 pcs.)

age recommendation: +14

WARNING! Not suitable for children under 36 months due to small pieces which may present a chocking hazard - DANGER OF SUFFOCATION !

Matador Klassik tool set +5 Years 9,99 €

Thu, 15 Oct 2026 16:50:04 +0200

This Matador spare parts pack contains: 1 hammer, 1 punch and 1 puller.

Age recommendation: 5 years and up

Safety notice:
WARNING! Not suitable for children under 3 years. Small parts may be swallowed = choking hazard!